These motors are low cost versions of MP Series motor. They have exactly the same mounting and shaft dimensions as MP.
Options
- Flange mount and Oval mount – 2 Holes.
- Side ports.
- Shafts: Straight or Splined.
- Shaft seal for high pressure.
- Ports: Metric or BSPP.
- Suitable for medium and low duty.
| CMP | |||||||||||
| CMP | Displacement | Max. speed | Max. Torgue | Max. Output | Max. Pressure Drop | Max. Oil Flow | |||||
| [cm3/rev] | [RPM] | [daNm] | [kW] | [bar] | [Ipm] | ||||||
| cont. | int* | cont. | int* | cont. | int* | cont. | int* | cont. | int* | ||
| CMP 50 | 49,5 | 1010 | 1100 | 7.8 | 8.8 | 7.4 | 8.5 | 125 | 140 | 50 | 55 |
| CMP 80 | 79,2 | 755 | 945 | 12.6 | 14.2 | 9.1 | 11.7 | 125 | 140 | 60 | 75 |
| CMP 100 | 99 | 605 | 755 | 15.7 | 17.7 | 9.0 | 1105 | 125 | 140 | 60 | 75 |
| CMP 125 | 123,8 | 486 | 605 | 19.7 | 22.1 | 8.9 | 11.3 | 125 | 140 | 60 | 75 |
| CMP 160 | 158,4 | 378 | 472 | 24.2 | 26.2 | 8.5 | 10.8 | 120 | 130 | 60 | 75 |
| CMP 200 | 198 | 303 | 378 | 29.0 | 32.8 | 8.3 | 10.8 | 115 | 130 | 60 | 75 |
| CMP 250 | 247,5 | 242 | 303 | 28.3 | 39.4 | 6.2 | 10.5 | 90 | 125 | 60 | 75 |
| CMP 315 | 316,8 | 190 | 236 | 30.2 | 38.3 | 5.5 | 8.0 | 75 | 95 | 60 | 75 |
| CMP 400 | 396 | 150 | 189 | 30.2 | 40.0 | 4.4 | 6.7 | 60 | 80 | 60 | 75 |
* Intermitten operation: the permissible values may occur for max. 10% of every minute
| Working Conditions | |
| Pressure fluid | Mineral based-HLP(DIN 51524) or HM(ISO 6743/4) |
| Temperature range °C | 40 – 140 |
| Optimal Viscosity range (mm2/s ) | 20 – 75 |
| Filtration | ISO code 20/16 (Min. recommended fluid filtration of 25 micron ) |
